Debian is a lightweight, stable, and mature linux distribution that has been around since 1993 and has over 29,000 software packages. The package design is quite modular, which allows developers to pick exactly what is needed for their project without building everything from source.
2 Network Configuration
You can change the default IP address of 192.168.0.50 to something that suits your network a little more. If you're interested in setting up a dynamic IP address, simply use the "dhclient" command from within Debian or "udhcpc" from within the busybox/fastboot environment. Older versions of Debian will use "pump" instead of dhclient. If you'd like a bit more control over the IP address, you can set the SBC up with a static IP address. From within Debian, edit "/etc/network/interfaces" to reflect the changes you'd like to make:
# Used by ifup(8) and ifdown(8). See the interfaces(5) man page or # /usr/share/doc/ifupdown/examples for more information.
auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 192.168.1.100 network 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1
#auto eth1 #iface eth1 inet dhcp
Then, edit the "/etc/resolv.conf" file to reflect the DNS servers:
#domain ts-local.net #search ts-local.net nameserver 184.108.40.206 nameserver 220.127.116.11
Now, reset the eth0 interface by using the command:
ifdown eth0; ifup eth0
Test the connection using the command:
For more advanced networking, see Debian's documentation
3 Package Management
Debian will offer better documentation on this subject, but this should be enough to get started.
apt-get update apt-get upgrade
apt-get update apt-get install python2.4
apt-get remove python2.4
Search for packages
apt-cache search nmap