From Technologic Systems Manuals
Jump to: navigation, search
TS-9422
TS-9422.jpg
Product Page
Documents
Schematic

Contents

1 Introduction

TS-9422 is a software debugging tool for use on any PC/104 system. It displays POST codes on two 7-segment LEDs. The default I/O location is the PC standard location of Hex 80. By installing jumper # JP5, the decoded I/O location is changed to location Hex 9D. This provides a unique address for the user's program to use during debug. This peripheral is designed for use with Technologic Systems' x86 SBC's.

  • Two 7-segment LEDs
  • PC/104 8-bit bus
  • Standard PC I/O address
  • Jumper selectable I/O address
  • Dimensions 3.375x1.375 inches

2 Hardware Configuration

2.1 Usage

Insert the TS-9422 in to the SBC it is to be used with, making sure to align all of the pins as well as taking note of the orientation using the mounting holes. Inserting the peripheral board backwards may cause damage. The two seven segment display will display the byte wide value stored at I/O address 80h which is used in x86 to display POST codes. The TS-9422 will display values at 9Dh if JP5 is installed.


3 Product Notes

3.1 FCC Advisory

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly (that is, in strict accordance with the manufacturer's instructions), may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class A digital device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the owner will be required to correct the interference at his own expense.

If this equipment does cause interference, which can be determined by turning the unit on and off, the user is encouraged to try the following measures to correct the interference:

Reorient the receiving antenna. Relocate the unit with respect to the receiver. Plug the unit into a different outlet so that the unit and receiver are on different branch circuits. Ensure that mounting screws and connector attachment screws are tightly secured. Ensure that good quality, shielded, and grounded cables are used for all data communications. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The following booklets prepared by the Federal Communications Commission (FCC) may also prove helpful:

How to Identify and Resolve Radio-TV Interference Problems (Stock No. 004-000-000345-4) Interface Handbook (Stock No. 004-000-004505-7) These booklets may be purchased from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.

3.2 Limited Warranty

Technologic Systems warrants this product to be free of defects in material and workmanship for a period of one year from date of purchase. During this warranty period Technologic Systems will repair or replace the defective unit in accordance with the following process:

A copy of the original invoice must be included when returning the defective unit to Technologic Systems, Inc. This limited warranty does not cover damages resulting from lightning or other power surges, misuse, abuse, abnormal conditions of operation, or attempts to alter or modify the function of the product.

This warranty is limited to the repair or replacement of the defective unit. In no event shall Technologic Systems be liable or responsible for any loss or damages, including but not limited to any lost profits, incidental or consequential damages, loss of business, or anticipatory profits arising from the use or inability to use this product.

Repairs made after the expiration of the warranty period are subject to a repair charge and the cost of return shipping. Please, contact Technologic Systems to arrange for any repair service and to obtain repair charge information.